Abbasi, Sedigheh
Improved Electrocatalytic Activity of Pt-SrCoO3-δ Nanoparticles Supported on Reduced Graphene Oxide for Methanol Electrooxidation [Volume 8, Issue 3, 2019, Pages 49-58]
Abdi, Behzad
Production of Cu-20Zn-10Al Nanostructured Alloy by Mechanical Alloying and Liquid Phase Sintering [Volume 8, Issue 2, 2019, Pages 43-52]
Afghahi, Seyed Salman
The Coating of Composite Nanoparticles of Bafe12o19/ MWCNT Using Silicon over Nowowen Substrtae for Radar Absorption In X And Ku Band [Volume 8, Issue 4, 2020, Pages 67-77]
Afzali, Arezo
The Coating of Composite Nanoparticles of Bafe12o19/ MWCNT Using Silicon over Nowowen Substrtae for Radar Absorption In X And Ku Band [Volume 8, Issue 4, 2020, Pages 67-77]
Aghaie Doost, Seyedeh Fatemeh
Effect of Solution pH on Magnetization of Graphene-Cobalt Nanocomposite Synthesized by Electrochemical Deposition Technique [Volume 8, Issue 3, 2019, Pages 59-69]
Ahmadian, Zahra
Investigation Nano-Mechanical Properties of NiTi alloy Modified by Carbon Plasma Immersion Ion Implantation [Volume 8, Issue 2, 2019, Pages 61-68]
Akhavan, Saeed
Investigation the Mild and Hard Anodizing of 1100 Aluminium Alloy in Different Acidic Electrolyte, and Characterization of Obtained Oxide Film [Volume 8, Issue 1, 2019, Pages 1-12]
Akhlaghi, Farshad
Theoretical and Experimental Investigations on Shear Strength of Al 6061/Gr Nanocomposites Produced by Powder Metallurgy [Volume 8, Issue 3, 2019, Pages 1-11]
Alehdaghi, Hassan
The Optimization of Hole Injection using Composite layer Containing of Graphene Oxide/Molybdenum Oxide in order to Enhance in Lifetime of Organic Light Emitting Diode [Volume 8, Issue 3, 2019, Pages 71-77]
Alizadeh, Masoud
An Investigation on Microwave Sintering and Its Effects on Crystal Structure, Microstructure and Microwave Dielectric Properties of Li2TiO3 Ceramic [Volume 8, Issue 2, 2019, Pages 53-59]
Alizadeh, Mostafa
Evaluation the Effect of Strain on Mechanical Behavior and Electrochemical Corrosion Properties of Al-2024 Alloy after Two-Step Aging and Thermomechanical Treatments [Volume 8, Issue 2, 2019, Pages 33-41]
Ansari, Narges
Effect of Solution pH on Magnetization of Graphene-Cobalt Nanocomposite Synthesized by Electrochemical Deposition Technique [Volume 8, Issue 3, 2019, Pages 59-69]
Asadian, Keivan
An Investigation on Microwave Sintering and Its Effects on Crystal Structure, Microstructure and Microwave Dielectric Properties of Li2TiO3 Ceramic [Volume 8, Issue 2, 2019, Pages 53-59]
Attarilar, Shokouh
Microstructural, Mechanical and Electrical Behavior of Copper-Tin alloys Produced by Continuous Casting Technique [Volume 8, Issue 1, 2019, Pages 35-43]
Azadbeh, Maziyar
Production of Cu-20Zn-10Al Nanostructured Alloy by Mechanical Alloying and Liquid Phase Sintering [Volume 8, Issue 2, 2019, Pages 43-52]
Azarkamand, Azin
A Survey of Format Anion Adsorption on 101 Surface of Anatase [Volume 8, Issue 1, 2019, Pages 13-22]
D
Dabir, Fatemeh
Kinetic Study on Surface Adsorption of Heavy Metal Cations by Nylon6/Zirconia Nano-absorbent [Volume 8, Issue 3, 2019, Pages 39-48]
E
Ebadzadeh, Touradj
An Investigation on Microwave Sintering and Its Effects on Crystal Structure, Microstructure and Microwave Dielectric Properties of Li2TiO3 Ceramic [Volume 8, Issue 2, 2019, Pages 53-59]
Ebrahimi, Mahmoud
Microstructural, Mechanical and Electrical Behavior of Copper-Tin alloys Produced by Continuous Casting Technique [Volume 8, Issue 1, 2019, Pages 35-43]
Ekrami-Kakhki, Mehri-Saddat
Improved Electrocatalytic Activity of Pt-SrCoO3-δ Nanoparticles Supported on Reduced Graphene Oxide for Methanol Electrooxidation [Volume 8, Issue 3, 2019, Pages 49-58]
Esfahani, Hamid
Kinetic Study on Surface Adsorption of Heavy Metal Cations by Nylon6/Zirconia Nano-absorbent [Volume 8, Issue 3, 2019, Pages 39-48]
Esfahani, Hamid
Photoluminescence and IR Properties of Al doped ZnO Nanofibers [Volume 8, Issue 4, 2020, Pages 9-17]
Eshraghi, Mohamad Javad
Investigating the Effect of Phosphorus Concentration on the Performance of Porous Silicon Solid State Solar Cells [Volume 8, Issue 1, 2019, Pages 65-71]
Esmaeilzadeh, Javad
NO2 and CO Gas Sensing Properties of Cadmium Oxide- Based Gas Sensors [Volume 8, Issue 4, 2020, Pages 57-65]
F
Faryabi, Mahshid
Electrochemical Deposition of Manganese Hexacyanoferrate Nanoparticles on a Graphite Substrate for Supercapacitor Application [Volume 8, Issue 3, 2019, Pages 13-20]
Farzaneh, Nahid
Improved Electrocatalytic Activity of Pt-SrCoO3-δ Nanoparticles Supported on Reduced Graphene Oxide for Methanol Electrooxidation [Volume 8, Issue 3, 2019, Pages 49-58]
G
Ghaffari, Somaye
An Investigation on Microwave Sintering and Its Effects on Crystal Structure, Microstructure and Microwave Dielectric Properties of Li2TiO3 Ceramic [Volume 8, Issue 2, 2019, Pages 53-59]
H
Hafizi, Mahziar
Theoretical evaluation of properties and behaviors of LiFeSO4F as a Li-ion battery cathode material: a DFT study [Volume 8, Issue 4, 2020, Pages 49-56]
Hoseini, Amin
Evaluating the Properties of Protective Coating Prepared on Titanium Using Plasma Electrolytic Oxidation in Potassium Phosphate Electrolyte [Volume 8, Issue 1, 2019, Pages 23-33]
Hosseini Najaf Abadi, Mehdi
The Effect of Heat Treatment Temperature on Wear Resistance of Ni-B Coating on the C63200 Alloy Applied by Electroless Process [Volume 8, Issue 1, 2019, Pages 55-64]
Hosseinipour, Seyed Jamal
The Effect of Thermomechanical Process on the Corrosion Behavior of AZ31 Magnesium Alloy in Simulated Body Fluid [Volume 8, Issue 3, 2019, Pages 21-30]
J
Jafari, Hamed
The Effect of Thermomechanical Process on the Corrosion Behavior of AZ31 Magnesium Alloy in Simulated Body Fluid [Volume 8, Issue 3, 2019, Pages 21-30]
Jafarian, Mojtaba
The Coating of Composite Nanoparticles of Bafe12o19/ MWCNT Using Silicon over Nowowen Substrtae for Radar Absorption In X And Ku Band [Volume 8, Issue 4, 2020, Pages 67-77]
Jazirehpour, Mohammad
Effect of Weight Percent and Particle Size of (Mg,Ti) Substituted Barium Hexaferrite Powder on Reflection loss Plots of Metal Back Ferrite/Acrylic Resin Composite [Volume 8, Issue 2, 2019, Pages 1-8]
Jomekian, Abolfazl
NO2 and CO Gas Sensing Properties of Cadmium Oxide- Based Gas Sensors [Volume 8, Issue 4, 2020, Pages 57-65]
K
Kabirian, Mohammadreza
Comparison of Carbon Nitride Nanosheets Synthesized by Thermal and Ultrasonic Thermal (combined) Methods [Volume 8, Issue 4, 2020, Pages 1-7]
Kaflou, Ali
The Effect of Adding Sn Powder to ST316L Powder on Sinter Ability and Microstructure of Steel Filters [Volume 8, Issue 4, 2020, Pages 31-37]
Kalantarian, Mohammad Mahdi
Theoretical Evaluation of Behaviours and Properties of LiFePO4 as Li-ion Battery Cathode Material: a DFT Study [Volume 8, Issue 1, 2019, Pages 45-53]
Kalantarian, Mohammad Mahdi
Theoretical evaluation of properties and behaviors of LiFeSO4F as a Li-ion battery cathode material: a DFT study [Volume 8, Issue 4, 2020, Pages 49-56]
K. Amini, Saeed
A Survey of Format Anion Adsorption on 101 Surface of Anatase [Volume 8, Issue 1, 2019, Pages 13-22]
Karami, Hamid Reza
Photoluminescence and IR Properties of Al doped ZnO Nanofibers [Volume 8, Issue 4, 2020, Pages 9-17]
Kazazi, Mahdi
Electrochemical Deposition of Manganese Hexacyanoferrate Nanoparticles on a Graphite Substrate for Supercapacitor Application [Volume 8, Issue 3, 2019, Pages 13-20]
Khakzadshahandashti, Arash
Analysis of Solidification and Liquation Cracks Formation of Zhs6u Superalloy Electron Beam Welding at Different Heat Inputs [Volume 8, Issue 2, 2019, Pages 9-21]
Khorsand Zak, Ali
Synthesis and Characterization of Zn1-xCoxO Nanopigments Their Colorometric Investigations [Volume 8, Issue 1, 2019, Pages 73-79]
Kolahi, Alireza
Evaluating the Properties of Protective Coating Prepared on Titanium Using Plasma Electrolytic Oxidation in Potassium Phosphate Electrolyte [Volume 8, Issue 1, 2019, Pages 23-33]
M
Mahmoudi, Shirin
Investigating the Effect of Phosphorus Concentration on the Performance of Porous Silicon Solid State Solar Cells [Volume 8, Issue 1, 2019, Pages 65-71]
Mastan, Ramin
Synthesis and Characterization of Zn1-xCoxO Nanopigments Their Colorometric Investigations [Volume 8, Issue 1, 2019, Pages 73-79]
Mobasherpour, Iman
The Effect of Temperature on Sintering Behavior of Fe-TiC Composite Prepared from Ilmenite by SPS Method [Volume 8, Issue 3, 2019, Pages 31-37]
Mohammadzadeh, Ahad
Production of Cu-20Zn-10Al Nanostructured Alloy by Mechanical Alloying and Liquid Phase Sintering [Volume 8, Issue 2, 2019, Pages 43-52]
Momen Baghdad Abad, Danial
The Effect of Heat Treatment Temperature on Wear Resistance of Ni-B Coating on the C63200 Alloy Applied by Electroless Process [Volume 8, Issue 1, 2019, Pages 55-64]
Momeni, Masoud
Theoretical evaluation of properties and behaviors of LiFeSO4F as a Li-ion battery cathode material: a DFT study [Volume 8, Issue 4, 2020, Pages 49-56]
Mosayebi, Ali
Kinetic Study on Surface Adsorption of Heavy Metal Cations by Nylon6/Zirconia Nano-absorbent [Volume 8, Issue 3, 2019, Pages 39-48]
Mosleh-Shirazi, Sareh
Theoretical and Experimental Investigations on Shear Strength of Al 6061/Gr Nanocomposites Produced by Powder Metallurgy [Volume 8, Issue 3, 2019, Pages 1-11]
Mottagitalab, Vahid
The Coating of Composite Nanoparticles of Bafe12o19/ MWCNT Using Silicon over Nowowen Substrtae for Radar Absorption In X And Ku Band [Volume 8, Issue 4, 2020, Pages 67-77]
Mozaffari, Samaneh
Preparation of Porous ZnO/MWCNT Nanocomposite and ZnO Nanoparticles Derived from Metal-Organic Framework and use them as Photoanode in Dye Sensitized Solar Cell (DSSC) [Volume 8, Issue 4, 2020, Pages 39-47]
N
Naderi, Nima
Investigating the Effect of Phosphorus Concentration on the Performance of Porous Silicon Solid State Solar Cells [Volume 8, Issue 1, 2019, Pages 65-71]
Naeimi, Azadeh Sadat
Preparation of Porous ZnO/MWCNT Nanocomposite and ZnO Nanoparticles Derived from Metal-Organic Framework and use them as Photoanode in Dye Sensitized Solar Cell (DSSC) [Volume 8, Issue 4, 2020, Pages 39-47]
Nakhaei Madih, Amin
Synthesis and Characterization of Zn1-xCoxO Nanopigments Their Colorometric Investigations [Volume 8, Issue 1, 2019, Pages 73-79]
Noormohammadi, Mohammad
Investigation the Mild and Hard Anodizing of 1100 Aluminium Alloy in Different Acidic Electrolyte, and Characterization of Obtained Oxide Film [Volume 8, Issue 1, 2019, Pages 1-12]
Nourmohammadi, Abolghasem
Synthesis of Lead Zirconate Titanate Nanostructured Thin Films Using Polyols [Volume 8, Issue 2, 2019, Pages 69-76]
O
Osali, Soheila
Photoluminescence and IR Properties of Al doped ZnO Nanofibers [Volume 8, Issue 4, 2020, Pages 9-17]
P
Pilevar Shahry, Rahele
Synthesis and Characterization of Zn1-xCoxO Nanopigments Their Colorometric Investigations [Volume 8, Issue 1, 2019, Pages 73-79]
R
Rabiee, Seyed Mahmood
The Effect of Thermomechanical Process on the Corrosion Behavior of AZ31 Magnesium Alloy in Simulated Body Fluid [Volume 8, Issue 3, 2019, Pages 21-30]
Rahimipour, Mohammad Reza
Analysis of Solidification and Liquation Cracks Formation of Zhs6u Superalloy Electron Beam Welding at Different Heat Inputs [Volume 8, Issue 2, 2019, Pages 9-21]
Rahimipour, Mohammad Reza
The Effect of Temperature on Sintering Behavior of Fe-TiC Composite Prepared from Ilmenite by SPS Method [Volume 8, Issue 3, 2019, Pages 31-37]
Raiesi Goojani, Payam
Evaluation the Effect of Strain on Mechanical Behavior and Electrochemical Corrosion Properties of Al-2024 Alloy after Two-Step Aging and Thermomechanical Treatments [Volume 8, Issue 2, 2019, Pages 33-41]
Rasei, Farnaz
The Effect of Temperature on Sintering Behavior of Fe-TiC Composite Prepared from Ilmenite by SPS Method [Volume 8, Issue 3, 2019, Pages 31-37]
Razavi, Mansor
The Effect of Temperature on Sintering Behavior of Fe-TiC Composite Prepared from Ilmenite by SPS Method [Volume 8, Issue 3, 2019, Pages 31-37]
Razavi, Mansour
Analysis of Solidification and Liquation Cracks Formation of Zhs6u Superalloy Electron Beam Welding at Different Heat Inputs [Volume 8, Issue 2, 2019, Pages 9-21]
S
Sadrnezhaad, Sayed Khatiboleslam
Comparison of Carbon Nitride Nanosheets Synthesized by Thermal and Ultrasonic Thermal (combined) Methods [Volume 8, Issue 4, 2020, Pages 1-7]
Salehi, Ahmad
Comparison of Carbon Nitride Nanosheets Synthesized by Thermal and Ultrasonic Thermal (combined) Methods [Volume 8, Issue 4, 2020, Pages 1-7]
Salehi, Mohammad Taghi
Microstructural, Mechanical and Electrical Behavior of Copper-Tin alloys Produced by Continuous Casting Technique [Volume 8, Issue 1, 2019, Pages 35-43]
Seyedraoufi, Zahra Sadat
The Effect of Heat Treatment Temperature on Wear Resistance of Ni-B Coating on the C63200 Alloy Applied by Electroless Process [Volume 8, Issue 1, 2019, Pages 55-64]
Shafiei, Seyedeh Sara
Preparation and Evaluation of Polycaprolactone / Amine Functionalized Carbon Nanotube Electrospun Nanocomposite Scaffold Containing Mesenchymal Stem Cells for Use in Hard Tissue Engineering [Volume 8, Issue 4, 2020, Pages 19-30]
Shajari, Yazdan
The Effect of Heat Treatment Temperature on Wear Resistance of Ni-B Coating on the C63200 Alloy Applied by Electroless Process [Volume 8, Issue 1, 2019, Pages 55-64]
Shamakhi, Hosein
The Effect of Heat Treatment Temperature on Wear Resistance of Ni-B Coating on the C63200 Alloy Applied by Electroless Process [Volume 8, Issue 1, 2019, Pages 55-64]
Shams, Mohammad Hossein
Effect of Weight Percent and Particle Size of (Mg,Ti) Substituted Barium Hexaferrite Powder on Reflection loss Plots of Metal Back Ferrite/Acrylic Resin Composite [Volume 8, Issue 2, 2019, Pages 1-8]
Shanaghi, Ali
Investigation Nano-Mechanical Properties of NiTi alloy Modified by Carbon Plasma Immersion Ion Implantation [Volume 8, Issue 2, 2019, Pages 61-68]
Shayegh Boroujeny, Behrooz
Investigation on Corrosion Behavior of Nickel Nanocrystalline layers Induced by Surface Mechanical Attrition Treatment (SMAT) in Alkaline Solutions [Volume 8, Issue 2, 2019, Pages 23-32]
Shayegh Boroujeny, Behrooz
Evaluation the Effect of Strain on Mechanical Behavior and Electrochemical Corrosion Properties of Al-2024 Alloy after Two-Step Aging and Thermomechanical Treatments [Volume 8, Issue 2, 2019, Pages 33-41]
Shiralipoor, Faeze
Preparation and Evaluation of Polycaprolactone / Amine Functionalized Carbon Nanotube Electrospun Nanocomposite Scaffold Containing Mesenchymal Stem Cells for Use in Hard Tissue Engineering [Volume 8, Issue 4, 2020, Pages 19-30]
Shirvani, Kourosh
Analysis of Solidification and Liquation Cracks Formation of Zhs6u Superalloy Electron Beam Welding at Different Heat Inputs [Volume 8, Issue 2, 2019, Pages 9-21]
Soltani, Masood
Investigation the Mild and Hard Anodizing of 1100 Aluminium Alloy in Different Acidic Electrolyte, and Characterization of Obtained Oxide Film [Volume 8, Issue 1, 2019, Pages 1-12]
Souri, Ali Reza
Investigation Nano-Mechanical Properties of NiTi alloy Modified by Carbon Plasma Immersion Ion Implantation [Volume 8, Issue 2, 2019, Pages 61-68]
T
Tohidlou, Mohammad hadi
Preparation and Evaluation of Polycaprolactone / Amine Functionalized Carbon Nanotube Electrospun Nanocomposite Scaffold Containing Mesenchymal Stem Cells for Use in Hard Tissue Engineering [Volume 8, Issue 4, 2020, Pages 19-30]
Y
Yarmand, Benyamin
Evaluating the Properties of Protective Coating Prepared on Titanium Using Plasma Electrolytic Oxidation in Potassium Phosphate Electrolyte [Volume 8, Issue 1, 2019, Pages 23-33]
Yarmand, Benyamin
Investigating the Effect of Phosphorus Concentration on the Performance of Porous Silicon Solid State Solar Cells [Volume 8, Issue 1, 2019, Pages 65-71]
Z
Zaghian, Nima
Investigation on Corrosion Behavior of Nickel Nanocrystalline layers Induced by Surface Mechanical Attrition Treatment (SMAT) in Alkaline Solutions [Volume 8, Issue 2, 2019, Pages 23-32]
Zahraee, Seyed Mohammad
The Effect of Adding Sn Powder to ST316L Powder on Sinter Ability and Microstructure of Steel Filters [Volume 8, Issue 4, 2020, Pages 31-37]
Zirak, Mohammad
The Optimization of Hole Injection using Composite layer Containing of Graphene Oxide/Molybdenum Oxide in order to Enhance in Lifetime of Organic Light Emitting Diode [Volume 8, Issue 3, 2019, Pages 71-77]